Kit Includes: Zoom H6 Recorder, 2 x AT2020 Microphones w/ articulating desktop boom arms, 2 x Overear Headphones
Zoom F8 Recorder
Kit includes: Field recorder, Orca bag, 2 x TA3 - XLR cables, 2 x NP-1 batteries and dual charger, NP-1 cap cable, DC power supply, 64GB SDXC card
Zoom F8 Multitrack Field Recorder
8x XLR/TRS Combo Jacks with +75 dB Gain
Up to 24-Bit/192 kHz PCM Recording
Record Up to 10 Tracks Simultaneously
Comtek 1:2 M-216 / Pr-216 IFB Kit
Kit includes: 1 x M-216 P7 Transmitter, 2 x Pr-216 Receivers w/ headphones
Zoom H6 Recorder
Kit Includes: H6 Body, Remote w/ cable, dead cat, wind foam, EXH-6 Module, LANC Extension Cable, XYH-6 Stereo Module, 16GB SDHC Card, MSH-6 Omni module, USB Wall Plug, 2x USB to USB-B cables, Remote Extension
Sennheiser MKH 50 P48
Dialog Boompole Microphone
Pressure Gradient Condenser
For Spot Capture
For Recording / Sound Reinforcement
Includes: Transmitter, Receiver, and choice of capsule
The Sennheiser ew G3 Wireless Portable Microphone System is intended for portable wireless operation, such as video and field recording applications. This system includes a camera-mountable receiver, bodypack transmitter, and ME 2 lavalier microphone. The SK 100 G3 bodypack transmitter and EK 100 G3 receiver synchronize channel and frequency at the touch of a button.
An optional rechargeable battery pack allows you to charge batteries while they remain inside. The receiver includes the CA 2 shoe-mount adapter, for easy installation onto a camera shoe. A back-lit display allows for easy operation under dimly lit conditions and its user-friendly menu makes operation quick and easy.
Schoeps CMC 6 / MK41
The Schoeps Colette Series microphone system is popular among professional field audio engineers. The gray modular CMC6 preamplifier and MK41 supercardioid capsule provide a professional alternative to shotgun microphones when recording dialog indoors. The system is based on the modular CMC6 preamplifier and MK series capsules which are capable of wide, linear frequency response curves and superior audio quality. This system includes the CMC6 preamplifier, MK41 capsule, SG20 microphone mount, B5 pop-filter and case.
The CMC6 Preamplifier features Class-A transformerless electronics, resulting in a very low noise floor and lightweight. The high impedance input signal of the modular capsules are accurately converted to low-impedance energy, allowing for long cable runs without noise and radio frequency interference.
The MK41 Capsule is a supercardioid condenser capsule with a wide frequency range and high SPL handling. The supercardioid capsule is effective in minimizing noise and ambient audio at the off-axis sections of the microphone capsule. The microphone system is more than suitable for crucial capturing of dialog and ambiance for film, professional video and professional audio applications. Modular Design The CMC6 is designed to be used with any of the Schoeps Colette series modular capsules. The capsules provide various polar patterns and frequency response curves. Wide Frequency Response The CMC6 modular power supply features transformerless Class-A electronics that result in a linear 50Hz to 20kHz frequency response. Superior Sound Characteristics The superior quality of the capsule and preamplifier result in detailed, pristine audio quality with very low noise floor.
Denecke TS-3EL Time Code Slate
Back light Display
Auto set frame rate
Flat back for camera logs
Blinking LED jam indicator.
Battery voltage readout.
Sync error display
Sliding access door to controls and quick load battery pack
MODE A: Enable / Disable Modes
MODE B: Set value of selected modes
Designed for recording audio in film, radio, and television the MKH 416 from Sennheiser is a short shotgun interference microphone optimized for outdoor applications. It offers excellent directional control in a compact design with high consonant articulation and rejection of feedback. The unit is highly immune to humidity because of its RF condenser design. It operates as a hypercardioid at low and medium frequencies with a lobar pattern above 2 kHz.
Pressure gradient receiver with short interference tube Employs RF-technology to control residual microphone noise. Optimizing the transducer's acoustic impedance results in a further improvement in low noise performance The RF-design yields low noise levels and high immunity to humidity and moisture The comparatively low RF-voltage across the elements of the transducer also eliminates arcing and DC-bias creeping currents Hypercardioid at low and medium frequency, above 2 kHz approaches lobar pattern Very low inherent self-noise High sensitivity Transformerless and fully floating balanced output Rugged, suitable for adverse climatic conditions Matt black all-metal body Increased directivity
Besto TCX-2 Time Code Transceiver
Ultra small & lightweight
Intuitive control with graphic OLED display
Incredibly accurate to 01 ppm
Low power consumption for 50 hours of battery life
Includes: Firmware upgrade which adds additional time code generating, jamming, and operation functions. 18" SDI Cable.
Kit Includes: Recorder, 4GB SD card, Wind Foam, AC Power Supply, Kick Stand, USB 2.0 Cable
The black Rode NTG3 Shotgun Microphone is a professional shotgun microphone that delivers a few unique qualities in order to meet the demands of today's broadcast audio engineers and boom operators. The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WiFi networks, internet devices, power lines, etc. The microphone is also built to withstand the rigors of adverse weather conditions.
Of course special attention is paid to the accurate, directional pickup characteristics and its frequency response, sensitivity and low noise floor, which result in pristine audio quality. The NTG3 shotgun microphone is an ideal solution for outdoor ENG and studio applications.
RF Rejection The microphone features radio-frequency (RF) interference properties that avoid annoying noise and interference caused by nearby RF sources such as radio antennas, WiFi networks, internet devices, power lines, etc. Withstands Adverse Conditions The microphone is constructed to withstand adverse weather conditions for more stable use outdoors. Supercardioid Line+Gradient Pickup The supercardioid, shotgun characteristics provide excellent off-axis rejection, focused pickup and longer range.
The Sound Devices MM-1 is a single channel, portable microphone preamp and headphone monitor designed for monitoring sound for film (boom operators), broadcast and ENG, field recording, voice over and corporate / industrial environments. The mic preamp features exceptional audio quality with a dynamic range exceeding 120dB and an audio bandwidth of 10Hz to 50kHz.
The balanced XLR microphone input provides user switchable +48V, 12V and 12V-T phantom power. A separate balanced monitor input accepts balanced or unbalanced line level signal. The 1/4" TRS headphone output is capable of monitoring microphone signal, external line level signal or a mix of both. A 3-position low cut filter switch eliminates noise below 80Hz and 160Hz. The compact unit features a belt clip and is powered with 2 AA batteries or external DC power source.
Compact & Portable The MM-1 microphone preamp is compact, lightweight and features a belt clip, allowing comfortable operation for field audio engineers Versatile Monitoring A separate input accepts line level signal and the headphone output is capable of monitoring the mic input signal, line input signal or a mix of both Peak Limiter Peak limiter eliminates noise and distortion caused by signal overload Low Cut Filter A 3-position low cut filter switch eliminates noise at the 80Hz and 160Hz frequency ranges Superior Audio Quality The transformer balanced mic input and premium electronics yield a dynamic range exceeding 120dB with a 10Hz to 50kHz audio bandwidth
Ktek Boom Pole
Available in two lengths: 7' or 9'
Internally coiled XLR cable and connection at the base The KE-89CC features a bottom-mounted 3-pin XLR connection Designed to fit in any standard equipment case, for ENG, EFP and DV location production work Jam-resistant collar coupling Unique pole top design with cable retention slots and replaceable stailess steel mounting stud